ATS-Friendly Resume: What Parsers Can and Can’t Read

Tables, columns, headers, PDFs, fonts: what applicant tracking systems struggle with, according to the companies that build them, and a checklist you can use today.

ResumeBot6 min read
On this page
  1. What an ATS-friendly resume is
  2. The layout problems vendors name
  3. Can an ATS read a two-column resume?
  4. Can an ATS read tables?
  5. What about photos and icons?
  6. PDF or Word?
  7. Fonts
  8. Keywords: wording beats tricks
  9. A two-minute test you can do now
  10. The checklist
  11. Does this mean a plain, ugly resume?

Every template shop promises an ATS-friendly resume, usually without saying what that means. Most advice on the subject is people repeating each other.

There is a better source. The companies that build applicant tracking systems publish help pages for recruiters explaining why a resume failed to import properly. Those pages are a list of what their parsers struggle with, written by the people who built them. This guide sticks to those, plus guidance from the US Department of Labor and university career offices where it agrees.

What an ATS-friendly resume is

When you apply, the system tries to read your resume and fill in a profile: name, contact details, employers, job titles, dates, education, skills. Greenhouse describes it as scanning the resume and auto-filling the fields it detects.

It is simply a resume that software can read in the right order, so those fields come out correct. If it cannot, Greenhouse says the result is “a partial resume parse that will need to be manually corrected and verified” by the recruiter. Your application is not deleted. But a profile with a missing phone number or jumbled job history is a worse start than a clean one, and wrong fields mean you may not appear in a recruiter’s search.

The layout problems vendors name

Greenhouse’s help page on unsuccessful resume parses lists the causes directly. SmartRecruiters publishes similar advice for candidates. Here is what they say.

What

What the vendor says

What to do

Tables

Greenhouse: “Complex resumes with tables, headers, and footers”. SmartRecruiters: “Avoid tables and columns”.

Lay out experience as plain lines of text, not table cells.

Two or more columns

Greenhouse: “Resumes that have a columned layout”.

Use a single column for anything that must be read correctly.

Contact details in a header, footer or text box

Greenhouse: “Resumes with the name and contact information in the header, footer, or text box”.

Put your name, email and phone in the body, at the top.

Graphics and photos

Greenhouse: “Resumes that include graphics, photos, or word art”.

Never put information inside an image. Skill bars and icons carry no text.

Spaced-out letters

Greenhouse: “the parser won’t recognize the separate letters as a single word”.

Do not type “J O H N S M I T H”. Use letter-spacing in the design instead, if at all.

Unusual section names

SmartRecruiters: use basic names such as “education” and “work experience” instead of “Where I’ve been”.

Experience, Education, Skills. Save the creativity for the content.

Shortened job titles

Greenhouse: “Sr. Account Exec instead of Senior Account Executive”.

Write job titles out in full.

The US Department of Labor’s resume guide gives job seekers the same advice in two lines: “Do not use tables or columns. Stick to a simple layout with left-aligned text”, and “Avoid placing vital information in headers or footers.”

Can an ATS read a two-column resume?

Sometimes. Parsers differ, and some handle columns well. But a columned layout is on Greenhouse’s own list of things that cause failed or partial parses, and you usually cannot tell which system an employer uses. When a parser reads across both columns instead of down each one, your job titles end up mixed with your skills list.

If you like a two-column design, keep it for a version you hand to people directly, and send a single-column version through application forms.

Can an ATS read tables?

Treat tables the same way. Both Greenhouse and SmartRecruiters name them. A table is often how a two-column layout is built in Word, so a resume can contain one without looking like it.

What about photos and icons?

A parser reads text. A photo, a logo or an icon contributes nothing it can use, and Greenhouse lists graphics and photos among the causes of trouble. A small icon beside your phone number is harmless if the number itself is typed as text. A star rating for your skills tells the software nothing at all.

PDF or Word?

Both are widely accepted, and the vendors do not agree on a favourite:

So follow the application form first: if it asks for a specific format, use it. Otherwise either works, with one firm rule that every vendor agrees on.

The file must contain real text, not a picture of text. Greenhouse lists resumes “uploaded as an image, rather than a document” as a cause of failed parsing. Lever says it “cannot parse information from image files”. SmartRecruiters says “Do not scan the pdf as an image”. A resume you printed and scanned, or exported from a design tool as a flattened image, is invisible to a parser.

Lever gives the simplest test there is: “If you cannot highlight text, the document is likely not parseable.” Open your PDF and try to select a sentence with your cursor.

Two smaller points. Keep the file small: Greenhouse cannot parse resumes larger than 2.5MB, which in practice means a file full of images. And export your PDF from the program you wrote it in, using “Save as PDF” or “Export”, instead of printing and scanning.

Fonts

Less depends on this than the internet suggests. SmartRecruiters advises candidates to “use one standard font throughout the entire document”. None of the vendor pages we read name a particular font that fails.

What matters is that the font is an ordinary text font and the characters in the file are the characters you see. Decorative fonts that draw letters as shapes, and symbols used in place of letters, are where problems start. Pick one clean font and use it throughout.

Keywords: wording beats tricks

Recruiters find candidates by searching. Greenhouse’s talent filtering searches “the full text of resumes”, and in that feature the recruiter’s keyword “must exactly match the keyword in the application”. If the job says “accounts payable” and your resume says “paying supplier invoices”, a search for the first will not find the second.

Three habits cover it:

  1. Use the posting’s terms for skills, tools and job titles you really have.

  2. Write the long and short form once each. The Department of Labor’s example is “Search Engine Optimization (SEO)”.

  3. Put keywords inside your achievements, not only in a skills list. The same guide says: “Repeat keywords in your achievement statements. Don’t rely only on the skills section.”

And one thing to avoid: adding skills you do not have. SmartRecruiters warns that candidates who do this “run the risk of being screened out” later. A keyword gets you read. It does not get you through an interview.

To see how your resume compares with a specific job, paste both into the free ATS resume checker. It lists which of the job’s terms you already use and which are missing.

A two-minute test you can do now

  1. Open your resume as a PDF and try to highlight a sentence. If you cannot select the text, the file is an image. Export it again from the original document.

  2. Select everything, copy it, and paste it into a plain text editor such as Notepad or TextEdit.

  3. Read the pasted text top to bottom. Is your name at the top? Are your contact details there? Does each job’s title, employer and dates stay together, in order? Are the bullets under the right job?

What you see in that plain text is close to what a parser has to work with. If it comes out scrambled, with lines from two columns interleaved or your contact details missing, fix the layout before you send another application.

The checklist

  • One column for everything that matters.

  • No tables, text boxes or information inside images.

  • Name, email and phone number in the body of the page, not the header or footer.

  • Standard headings: Experience, Education, Skills.

  • Job titles written out in full.

  • One ordinary font.

  • A text-based PDF or a .docx, whichever the form asks for, under 2.5MB.

  • The job’s own wording for the skills and tools you have, with abbreviations spelled out once.

  • Passes the highlight test and the copy-and-paste test.

Does this mean a plain, ugly resume?

No. Every item above is about structure, not style. Clear type, sensible spacing, a restrained accent colour and good headings are all fine, and they help the person who reads it after the software does.

If you build your resume in ResumeBot, choose a single-column template, or open Customize and set Columns to One. The PDF it exports is real text, so it passes the highlight test. Then check it against the job with the full ATS check before you apply.

One last thing. A well-formatted resume gets you read correctly. It does not decide whether you get the interview. If you have been told that software rejects most resumes before anyone sees them, that claim does not hold up either: we traced it in does an ATS reject your resume?

  • ATS
  • Resume format
  • Resume tips
Share this post

Keep reading